Pre-fabricated liner
Made to your tank or basin, priced per m²
Product shown for illustration — spec above is definitive
Fabricated in the factory to your finished size, so the liner arrives as one panel instead of rolls to weld in the hole. Put your tank or basin dimensions into the liner calculator and it works out the area for you — reinforced HDPE, ArmorScrim or flexible polypropylene.
- Priced
- Per m² of finished liner
- Sizing
- From your tank or basin dimensions
- Materials
- Reinforced HDPE · PP
Material & thickness
Priced per m² of the finished panel. Not sure of the area? The calculator works it out from your tank or basin.
Quantity — panels
Total ex VAT
£2.71
£3.25 inc VAT
- SKU
- AQ-PFB-PS040
- Lead time
- Confirmed with your order
- Carriage
- £225.00 per order, ex VAT
- Sold
- Per finished panel
Specification
- Fabrication
- Factory pre-fabricated to your finished dimensions
- Reinforced HDPE
- Powerscrim 0.4mm, 0.6mm, 1mm
- Reinforced membrane
- ArmorScrim 0.75mm
- Polypropylene
- Superflex 1mm
- Priced
- Per m² of finished liner, ex VAT
Documents
- Powerscrim 0.6mm datasheetReinforced HDPE — open datasheet ↗
- Powerscrim 1mm datasheetReinforced HDPE — open datasheet ↗
- ArmorScrim 0.75mm datasheetReinforced impermeable membrane — open datasheet ↗
- Superflex PP 1mm datasheetPolypropylene membrane — open datasheet ↗
Datasheets and certificates are issued with every delivery. Need them before you order? Ask and we'll send them over.
What you get
- Liner fabricated to your finished dimensions
- Manufacturer's datasheet
Where it's used
- Wrapped geocellular attenuation tanks
- Attenuation basins and ponds
- Tanked sub-bases under car parks
- Bunds and secondary containment
Supply & install
We'll put it in for you.
Buying the parts is one option. The other is handing us the drawing and taking a single installed price — with the welding, test weld and handover documentation included.
Attenuation tanks →Before you order
Frequently asked questions
Use the liner calculator. Enter the length, width and depth of your tank — or the base and side slope of a basin — and it returns the finished area, with laps and a waste allowance, ready to add to the basket.
Reinforced HDPE (Powerscrim) is the usual choice for wrapping attenuation tanks; the thicker grades take more punishment on a rough site. Polypropylene is more flexible for awkward shapes and detailing. If you're not sure, send us the drawing and we'll specify it.
Related products
Related products
SUP-05Made to orderGeotextiles
Pre-fabricated geotextile
Protection fleece made to your liner size
- Priced
- Per m², made to size
- Weights
- 250 – 300gsm
- Use
- Under and over the liner
from£1.51
ex VAT per m² · £1.81 inc
SUP-06Made to orderTop hats
Powerscrim top hat
Pipe seals for reinforced HDPE liners
- Pipe sizes
- 110 – 225mm
- Angles
- 45° · 90°
- For
- Powerscrim liners
from£2.70
ex VAT each · £3.24 inc
SUP-04Direct from manufacturerGeotextiles
TerraTrack Pro 300gsm non-woven geotextile
Protection fleece in three roll sizes
- Weight
- 300gsm
- Type
- Non-woven
- Use
- Both faces of the liner
from£243.60
ex VAT per roll · £292.32 inc
Tell us about your project
Quote back within one working day